USB Dial
USB phone and adaptor for internet VOIP phone calls.
Works with Skype. Approved for Australia.

  

 

Making and receiving calls with USB DIAL internet telephone or adaptor

How to make an internet telephone call
After completing the setup section you are ready to make internet calls.

 

To start the call

IPMate S80 - Lift the handset and press the 'On/Off' button or equivalent and the Skype window will appear.

IPMate S60.- The bottom line of the keypad consists of 3 coloured buttons.       Press the middle button     and the Skype window will appear
.
If the person you want to call is not yet on the contact list then you can first add the contact and a speed dial number which is stored for future use.

To add a new contact :

Click on the button and the following screen appears

 
To assign a speed dial number to a contact. Right click on the required contact to get this screen
 

To call someone already on the list just enter their Speed-dial number here:
eg to call Aunt Polly just enter '2' here
To call a SkypeOut number (ie the receiver is not using Skype)

IPMate S80 -   you need to dial  "00"+"country code"+ "area code" + "local number" and then '#'  to start the call. eg to call 9143-5678 in Sydney you would dial '0061291435678' and then press '#' to connect.

IPMate S60 -  you need to dial  "00"+"country code"+ "area code" + "local number" and then to start the call. eg to call 9143-5678 in Sydney you would dial '0061291435678' and then

You can see the progress of the call on the screen.
If the line is busy it will show on the screen instead of 'Connecting'. Similarly if the number is invalid or for whatever reason the call cannot connect you will hear a message through the phone and/or on the screen eg 'Invalid number'.
When the call connects the message changes to
To finish the call

IPMate S80 - Press "On/Off' or equivalent  on handset which terminates the call and minimizes the Skype window.

IPMate S60Press , which terminates the call and minimizes the Skype window.

How to receive an IPMate call
With IPMate S80 - when your handset  rings,  lift it , press "On/Off' or equivalent  and the call will connect. To end the call either end can  press "On/Off' or equivalent
With IPMate S60 - when the IPMate S60 rings,  lift it , press   and the call will connect. To end the call either end can  press

 

Site Map | Home | Purchase | Contact us | Setup | FAQ | USB phone | USB adaptor
 

© USB Dial